INDEX
Chemical anchors, also known as resin or chemical fixings are the products most widely used by both professionals and DIY enthusiasts to secure elements to different materials.
They are excellent solutions for fitting heavy-duty elements to both solid materials (concrete and stone) as well as hollow materials (masonry and hollow bricks). Basically, they act as an adhesive between the material and the inserted rod or shank. Chemical anchors/fixings have the following advantages:
Maximum performance
They can bear higher loads than mechanical fixings as the load is borne by the whole surface area of the perforation providing extra strong anchorage
Flexibility
Chemical anchors provide flexibility during work to adapt the fixing strength to the load requirements of the application. They allow the load capacity to be easily increased, if necessary, by increasing the depth or diameter of the drill
No stress exerted
Chemical anchors work through adherence and not through expansion like other fixings that work through pressure. This means that there is no stress generated in the surface around the perforation, allowing installation closer to the edge and with a smaller space between fixings.
Our Products
Quality Products
Accessories for chemical fixings.
INDEX
1 INDEX Mopure 600 ml
High Strength Pure Epoxy Resin
Characteristics
- Structural application
- Two 300ml, side by side cartridge
- Suitable for use in cracked and non-cracked concrete with all anchoring elements
- ETA-Approved for 10-32 mm rebar
- Fire resistance reports for threaded bars and reinforcing bars
- Structural connections with post installed rebar (e.g. extension / connections to walls, slabs, stairs, columns, foundations etc.)
- Seismic approval for use in seismic applications
- Used for high loads
- Pure epoxy & easy installations for wet & dry application.
Applications:
- Use in indoor and outdoor environments.
- Structural applications.
- Fixing of building substructures.
- Rebar and start rebar.
- Safety barriers, billboards, heavy engine, etc.
- Large metric sizes, retaining walls.
INDEX
2 Index Epoxy MO-H Hybrid Resin 410 ML
Characteristics:
- Assessed for structural applications in cracked and non-cracked concrete, M8 to M30. Rebar used as stud from Ø8 to Ø32.
- Assessed for post-installed rebar connections Ø8 to Ø25.
- Assessed for use in masonry.
- Certificate of contact with drinking water (WRAS).
- Fire resistance certificate for studs and rebar (IBMB).
- LEED and A+ certificates, Styrene free.
- Use for high loads, static or quasi-static. Seismic loads C1.
- Working life of 50 and/or 100 years.
- Valid for dry, wet and flooded holes.
- Valid for zinc plated steel, hot-dip galvanized, stainless steel A2, A4 and HCR.
- Temperature range: from -40ºC to +80ºC (long term maximum temperature +50ºC).
Applications:
- Use in indoor and outdoor environments.
- Structural applications
- Fixing of building substructures.
- Rebar and start rebar.
- For fixing enginery, balconies, awnings, shelving units, billboards, catenaries, safety barriers, railings, handrails, etc.
- Large metric sizes, retaining walls.
